Limiting the operation of the exit loop during specific times can enhance security by preventing unauthorized or unmonitored vehicle exits during vulnerable periods, such as late at night or during non-business hours. During the designated time ...
The following connections will allow an interlocked system whereby one operator is inhibited from moving (in either direction) while the other operator is in motion, and vice versa. Wiring diagram and settings to be done on the DX Smart controller:
If a gate is left open, it can pose a security risk by allowing unauthorized access. The Smart Siren acts as an alert system, notifying you that the gate has been left open and needs attention. Wiring diagram:
Wiring a smart siren to a smart gate motor can significantly enhance the security and functionality of your property, providing peace of mind and improving safety measure. Wiring a smart siren can either be used to provide an immediate audible alert ...
Setting on APP for closing beam: Setting < IRB Menu: Closing beam: ON Open beam: OFF Assigned IO: select IO used for beam N/C N/B: If beam common is used, enable beam common under the IR beam menu ...
If you encounter the “Drive Fault - Motor Drive Failure” error on your D5 EVO, D10, or D10 Turbo controller, the issue may be caused by: Loose or intermittent connections between the motor and controller A damaged H-bridge on the controller, such as ...
Please find attached the installation manual for the D20 SMART, which includes the following sections: Introduction Specifications Product identification Required tools and equipment New site installation preparation Lubrication Operator installation ...
The DOSS is an opto-electronic system that counts pulses to determine the gate’s position and the distance required to reach its respective endstops. Possible Causes of Error: DOSS physically disconnected Poor connection on the DOSS or controller ...