XTRAC Does Not Function From Remote

Possible causes:

Xtrac is not running due to holiday lock mode or due to low battery

Transmitters was deleted on the on-board receiver

Transmitter battery is low

Possible solutions:

Check function of XTrac by operating from ‘Run’ button

Check function of XTrac with substitute remote control

Re-learn remote control code into XTrac

Replace remote control battery

Related Articles
XTrac Installation Manual
Please find attached the installation manual for the XTrac garage door operator which includes the following sections: General description Icons used in this manual Technical Specifications Product identification Required tools and equipment Site ...
XTRAC Does Not Function at All
Possible causes: Low battery voltage XTrac not engaged properly Holiday lock mode evoked Possible solutions: Check that the power cord is plugged in and turned on Check the battery voltage Check that the XTrac is engaged Holiday Lockout mode ...
How to connect an external receiver to fully open and close the gate via remote button (trigger gate) on the D5 EVO.
Kindly follow the wiring diagram below to fully open and close the gate via remote button using an external receiver (TRG).
How to Program NOVA Remotes on the Onboard Receiver of an XTrac Garage Operator
Follow the steps below to program a remote for your XTrac motor. There are various functions available, depending on which button you select during the programming process. Functions Available for Remote Programming: Button 1: Open/Close - This ...
Learning a Remote Button for the Pedestrian Function on D5 EVO or D10
Should you desire to program a new Nova Remote button to the onboard receiver of the D5 EVO or D10 for the pedestrian gate function, which essentially opens the gate to a pedestrian opening, please follow the steps outlined below: Learning a Remote ...

Related Articles