XTRAC Runs Very Slowly

XTRAC Runs Very Slowly

Possible causes: 

Speed control setting may be too low

Low battery voltage

Door not balanced

 

Possible solutions: 

Speed control setting may be too low - increase speed setting

Batteries are running low - check that charger is charging

Garage door may be binding or out of balance


    • Related Articles

    • XTrac Installation Manual

      Please find attached the installation manual for the XTrac garage door operator which includes the following sections: General description Icons used in this manual Technical Specifications Product identification Required tools and equipment Site ...

    • How to Troubleshoot a Xtrac garage operator if Door Stops & Reverses Before Reaching Fully Closed Position - Troubleshooting

      If your door stops and reverses before reaching the fully closed position, try the following steps to resolve the issue: Possible causes: Physical obstruction Incorrect spring balance or incorrect door balance Low obstruction force setting Possible ...

    • XTRAC Does Not Function From Remote

      Possible causes:  Xtrac is not running due to holiday lock mode or due to low battery Transmitters was deleted on the on-board receiver Transmitter battery is low   Possible solutions:  Check function of XTrac by operating from ‘Run’ button Check ...

    • XTRAC Does Not Function at All

      Possible causes:  Low battery voltage XTrac not engaged properly Holiday lock mode evoked     Possible solutions:  Check that the power cord is plugged in and turned on Check the battery voltage Check that the XTrac is engaged Holiday Lockout mode ...

    • How to Program NOVA Remotes on the Onboard Receiver of an XTrac Garage Operator

      Follow the steps below to program a remote for your XTrac motor. There are various functions available, depending on which button you select during the programming process. Functions Available for Remote Programming: Button 1: Open/Close - This ...