What is an auto-close override?

• Auto-close timer is the time it takes before the gate motor automatically starts closing.

• The auto-close time set can be overridden in Standard and Reverse modes by pressing

and holding the button of the nova remote or external trigger for more than the autoclose

override time that is set.

Related Articles
How do I override Auto FRX on D-Series Controllers
Wiring Programming 1. Under Chrono-guard menu select Auto XIO 2. Select start time and end time (Ex. Start: MTWTF 07:00, End: MTWTF 17:00) 3. Invert logic OFF 4. Remote learned in as a Latch on the receiver. Basic Operation When XIO is active during ...
How do I override Auto FRX on Sector Controllers
Wiring: Programming: 1. Under Chrono-guard menu select Auto XIO 2. Select start time and end time (Ex. Start: MTWTF 07:00, End: MTWTF 17:00) 3. Invert logic OFF 4. Remote learned in as a Latch on the receiver. Basic Operation: When XIO is active ...
Manual Override not Toggle or Disconnected
Possible solutions: Ensure manual release blue connector block is plug to override: Ensure that blue cable is on the left and grey cable on the right of your blue connector block: Ensure that blue connector block is push in properly: Ensure that the ...
D-Smart Sliding Gate Motor Fails to Close When Triggered After Auto-Close in Condominium Mode or Pirac-Control Activation
Possible Causes: - Obstacles blocking the beams. - Depleted battery life in Centurion Systems Photon Smart Beams. - Battery life issues with the transmitter beam and incorrect wiring of the receiver, typically found in Centurion Systems Photon ...
How to activate the auto-close feature for your Smart motor from the MyCentsys pro APP

Related Articles