No Ring to Handset

No Ring to Handset

Possible causes: 

Loose connections and the cable on the hand set not fitted properly

Low line Voltage

Cradle switch faulty/sticky

Handset Cradle cable not properly plugged in

Handset not properly on cradle.


 

Possible solutions: 

Double check the wiring and make sure that there is no loose connections between the hand set

Make sure that the voltage is between 8-9 volts
Double check the that the cradle is in a working condition, properly plugge3d in and on the cradle 


    • Related Articles

    • Entry Panel Relay not Triggering When Gate Button is Pressed on Handset

      Possible causes:  Low voltage Wrong group selected Wiring issues  Faulty push button at the handset   Possible solutions:  Make sure that the supplied voltage is 12 v dc ​Check correct group (1 or 2) is selected on Entry Panel Double check the wiring ...

    • Polophone Installation Manual

      Please find attached the installation manual for the Polophone intercom, which includes the following sections: System overview and operation Specifications System components Power and wiring Installation Wiring diagram Settings and configuration ...

    • Low Volume

      Possible causes:  Volume on the handset Set too low Voltage drop on the cable due to distance Possible solutions:  Adjust the volume on the handset higher to get optimum level Power up the furthest handset

    • Gate Station Feedback/Audio Feedback

      Possible causes:  Cover not correctly fitted. Sponge behind mic or Speaker missing. Volume too high Handset too close to handset <1M Possible solutions:  Fit the cover correctly Double check and make sure that the sponge is in place Reduce volume ...

    • No Intercommunication

      Possible causes:  The handset is not set into different groups Low line voltage Wiring  Possible solutions:  Set the handset into different groups Double check the wiring and for any loose connections Check the wiring for any moisture or corrosion. ...