Lights Malfunction

Lights Malfunction

Possible causes: 

Globe blown

 

Possible solutions: 

Replace with 24V DC/3W globe


    • Related Articles

    • D10/D10 Turbo Mechanical Installation Guide

      Please find attached the installation manual for the D10/D10 Turbo, which includes the following sections: Introduction Specifications Product identification Required tools and equipment New site installation preparation Lubrication Operator ...
    • Solo installation manual

      Kindly refer to the manual below or please find the attached installation manual.
    • How to Troubleshoot a CP80 D5 or D3 Gate Motor When the Gate Does Not Run and the Relay does NOT Energise

      When you activate the gate motor using a remote or any trigger device, but the gate does not move, consider the following possible causes and solutions: Possible Causes: Still in programming mode Safety LED's are active Latching input Battery ...
    • RDO II Installation Manual

      Please find attached the installation manual for the RDO 11 garage operator, which includes the following sections: Safety Instructions Month carry-in product warranty Operator Installation Configuration Wiring diagrams Functionality Kindly refer to ...
    • D5 Evo Mechanical Installation Guide

      Please find attached the installation manual for the D5 EVO, which includes the following sections: Introduction Safety instructions Icons used in this guide General description Product identification Technical specifications Site preparation ...