How to wire I5 safety beams to your CP80 controller

By following the wiring diagram below, the beams will ensure that the gate does not close on objects in its path.

• Related Articles

• How to wire Photon safety beams on a CP80 controller.

  By following the wiring diagram below, the beams will ensure that the gate does not close on objects in its path.

• E1 - Safety Beams Active

  If this error appears the safety beams are obstructed, this will display as soon as the beams are obstructed (broken). Should the safety beams not be unobstructed check the alignment, wiring and jumper (on 2W for two wire and 4W for four wire). ...

• Photon Infrared Gate Safety Beams User Guide

  Please find attached the User Guide for the Photon Infrared Gate Safety Beams, which includes the following sections: Introduction Safety instructions Icons used in the guide Operation Technical specification Installation Kindly refer to the guide ...

• How to Troubleshoot a Beam Active Error on a D5 EVO

  If you find yourself unable to close or open your gate, and your controller LCD screen is displaying a ""Beam Active"" error, kindly refer to the below possible causes for this error to appear: Symptom: -When you press your remote or any trigger ...

• I5 Infrared Gate Safety Beams User Guide

  Please find attached the User Guide for the I5 Infrared Gate Safety Beams, which includes the following sections: Introduction Safety instructions Icons used in the guide Operation Technical specification Installation Kindly refer to the guide below ...