How to setup a GEO-Action from the MyCentsys remote app.

How to setup a GEO-Action from the MyCentsys remote app.

Notes
Geo-Action can be set to automatically open or close gates when you enter or exit a predefined geographical area. For example, you can set your gate to open automatically when you are within a certain distance from your home.
Info
To setup a GEO-Activation, kindly follow the steps below:
  1. Open your MyCentsys Remote App.
  2. Tap on the "More" option located at the bottom right of the screen and select the "Geo-Action" option.
  3. Tap on the "+ Geo-Action" option at the bottom of the page.
  4. Enter the desired name for the Geo-Action.
  5. Specify the location where you want the action to be triggered.
  6. Enable the prompt for exit or entry toggle switch as desired.
  7. Select the smart device that should be paired and the action that is required, then click on "Done."
  8. Tap on the "Save" button to save the Geo-Action you have created.
  9. Go back to the "Favorite" section and add the newly created Geo-Action trigger for easy access.
Idea
Please refer to the video below for a visual demonstration of the steps outlined above.


    • Related Articles

    • SDO5 SMART+ Manual

      Please find attached the installation manual for the SDO5 SMART+ garage door operator, which includes the following sections: INTRODUCTION PRODUCT SPECIFICATIONS PRODUCT IDENTIFICATION REQUIRED TOOLS AND EQUIPMENT PREPARATION OF SITE OPERATOR ...

    • Linking the MyCentsysRemote App to a G-Ultra user

    • How to Back up and Restore NOVA Remotes on your Centurion Systems or Centsys SMART operator : Video Tutorial and Download

      Watch how to Back up and Restore NOVA Remotes in the Tutorial Below: Important notes before you can start the process: This procedure is only for NOVA remotes using the internal NOVA receiver on your Centurion Systems\Centsys Controller Please note ...

    • Adding Admin Access to a SMART Controller

      Adding Admin Access to a SMART Controller Open the MyCentSys Pro app and establish a Bluetooth connection to your Smart motor. Navigate and select the "User" option that is situated at the button of the screen: Locate and select "Operator Admins" in ...

    • SMART+ Wi-Fi Connection

      SMART+ Controller Wi-Fi Setup Video Guide The following video will guide you through successfully connecting your SMART+ Operator to Wi-Fi. SMART+ Operator Wi-Fi Connection Guide Step 1: Open Settings Tap on the three dots at the bottom middle of the ...