How to Set Up SMS Message Activations from G-web - Programming

How to Set Up SMS Message Activations from G-web - Programming

Notes
You can configure a custom SMS message that, when sent to a device, will activate a specific output. This allows remote triggering of actions through a simple text message. Follow the steps below to set this up:

Info

Steps to Configure SMS Message Activation:

  1. Select the Device
    From your device list, click on the name of the device you wish to configure.

  2. Open the Access Profile
    Click on the Access Profile linked to the device:

  3. Click the Activations Icon
    Locate and click the Activations icon next to the profile name:

  4. Open the Messages Tab
    In the activation settings, click on the Messages tab:

  5. Enable an Incoming Activation
    Tick the checkbox next to the desired Incoming activation, then click Edit:

  6. Enter the Custom Message
    In the Message field, type the exact SMS text you want the system to recognize (e.g., “OpenGate”).:

  7. Select the IO to Activate
    Choose the IO (Input/Output) that should be triggered by the SMS message:

  8. Click Update
    Save your configuration by clicking the Update button.

Alert

Notes:

  • Ensure that the device has a valid SIM card and is capable of receiving SMS messages.

  • Use unique messages for each activation to avoid conflicts.

  • Test the configuration to confirm the correct output is activated.

    • Related Articles

    • G-Web/G-Ultra Installation Manual

      Please find attached the installation manual for the G-Web/G-Ultra , which includes the following sections: Introduction G-ultra unit LCD interface Wiring diagrams MyCentsys remote Troubleshooting Kindly refer to the manual below or please find the ...
    • G-Ultra 3G and G-web user manual

      Please find attached the manual for the G-Ultra, which includes the following sections: Introduction G-Ultra unit Wiring diagrams G-web G-web App MyCentsys remote Kindly refer to the manual below or please find the attached installation guide.
    • Why won't my access number spreadsheet import into G-WEB?

      The below needs to be adhered to when importing access number via a spreadsheet to G-WEB Ensure that all the required fields are completed. Columns A - F and J & K need to completed before importing a spreadsheet. Use the correct spreadsheet for ...
    • G-Speak Ultra 4G

    • No Limits Set (Sector)

      This error will display if the End-of-travel limits have not been established. Solution • Set the gate travel limits by accessing the Setting Limits menu (Menu1: Setting Limits) and following the onscreen prompts or steps supplied below: The ...