How do I override Auto FRX on D-Series Controllers

Wiring 

Programming

1. Under Chrono-guard menu select Auto XIO

2. Select start time and end time (Ex. Start: MTWTF 07:00, End: MTWTF 17:00)

3. Invert logic OFF

4. Remote learned in as a Latch on the receiver.

Basic Operation

When XIO is active during the pre-set time from Chrono-Guard a negative will be present on the COM of the relay hence completing the circuit from COM to FRX (on the D-series controller) once the remote is pressed latching the Relay on the N/O position the circuit will be open and the operator can be used as normal.

• Related Articles

• How do I override Auto FRX on Sector Controllers

  Wiring: Programming: 1. Under Chrono-guard menu select Auto XIO 2. Select start time and end time (Ex. Start: MTWTF 07:00, End: MTWTF 17:00) 3. Invert logic OFF 4. Remote learned in as a Latch on the receiver. Basic Operation: When XIO is active ...

• The ChronoGuard manual

• What is an auto-close override?

  • Auto-close timer is the time it takes before the gate motor automatically starts closing. • The auto-close time set can be overridden in Standard and Reverse modes by pressing and holding the button of the nova remote or external trigger for more ...

• D-series controller speed adjustment - PDF file

• D-series controller speed adjustment - PDF file