LED output: Green and red LEDs flash in sequence Possible causes: Code has been incorrectly entered three times Inadvertently changed access code when editing settings Possible solutions: Make sure that the code entered is correct Learn the code ...
LED output: Green LED illuminates Possible causes: Device has not been paired to a CENTSYS code-hopping receiver (SMARTGUARDair) Possible solutions: Pair the keypad with a CENTSYS code-hopping receiver (SMARTGUARDair) - Place the receiver into ...
LED output: Green LED illuminates Possible causes: The code has been programmed to activate Output 2 or 3 Possible solutions: Program the code to activate Output 1: - Enter Programming Mode = * Master Code* -Select Add Menu = 1 # - Enter User ...
LED output: Red LED illuminates Possible causes: The access code has not been learned into memory The access code was learned into memory with an access limit set Possible solutions: Learn the access code into memory:
LED output: Red LED triple-flashes rapidly every four seconds. The tone of the onboard buzzer will also be different from its normal pitch when pressing keys Possible causes: Battery voltage low (SMARTGUARDair) Possible solutions: Replace ...