Current Sensor Faulty Reading Too High / Too Low (D-Series)

• Related Articles

• Current Sensor Faulty Reading Too High / Too Low (D-Series)

  Possible causes • Poor/intermittent motor wire connection • Faulty electric motor • Controller hardware problem Solutions • Check connection of motor wires to controller • Replace green motor wire connector • Replace faulty electric motor • Replace ...

• Current Sensor Fault Reading Too High / Current Sensor Fault Reading Too Low (Sector)

  Possible Cause • Controller hardware problem Solution • Replace faulty controller

• Max Collisions (D-Series)

  Possible causes: • The operator is encountering an obstruction and has reached the pre-set number of allowable collisions • Gate rack resting on pinion • Seized gate wheels • The controller collision force is set too sensitively • Number of allowable ...

• E5 - Current/Voltage Sensor

  The door is too heavy for current force setting, increase the force offset value by using the “+” button in standby mode to F5. Should the error still appear, enable the Full Power (Fp) setting in the menu structure. *Limits Setup will have to be ...

• Max Collisions (D-Series)

  Possible causes: • The operator is encountering an obstruction and has reached the pre-set number of allowable collisions • Gate rack resting on pinion • Seized gate wheels • The controller collision force is set too sensitively • Number of allowable ...