Break In Alarm (Sector)

Break In Alarm (Sector)

Possible Causes
• The closing loop has been activated while the boom is
lowered
• Inadvertent activation of the Break-in Alarm feature

Solutions
• Remove any metal objects from the closing loop
• Check the loop wiring and impedance (should typically be
<5Ω)
• If not required, disable the Break-in Alarm feature in
Menu 6: Loop Detector

    • Related Articles

    • Break In Alarm (D-Series)

      Possible causes: • The IR PE beams have been interrupted with the gate in the fully closed position • Inadvertent activation of the Break-in Alarm feature Solutions:  • Clear any obstructions from the path of the PE beams • If the lenses are ...

    • Break In Alarm (D-Series)

      Possible causes: • The IR PE beams have been interrupted with the gate in the fully closed position • Inadvertent activation of the Break-in Alarm feature Solutions: • Clear any obstructions from the path of the PE beams • If the lenses are ...

    • Break In Alarm (V-Series)

      Possible causes • The IR Beams have been interrupted with the gate in the fully closed position • Inadvertent activation of the Break-In Alarm feature ​ Solutions • Clear any obstruction from the path of the beams • If the lenses are unobstructed, ...

    • Presence Alarm (Sector)

      Possible Causes • The closing loop has been activated for the time specified in Menu 6.5.1.2: Presence Time • Inadvertent activation of the Presence Alarm feature Solutions • Remove any metal objects from the closing loop • Check the loop wiring and ...

    • Sector 2 Installation Manual

      Please find attached the installation manual for the Sector 2 boom barrier, which includes the following sections: Glossary of terms Product identification Physical installation Onsite electrical wiring Basic controller setup Installation handover ...