Break In Alarm (D-Series)
Possible causes:
• The IR PE beams have been interrupted with the gate in the fully closed position
• Inadvertent activation of the Break-in Alarm feature
Solutions:
• Clear any obstructions from the path of the PE beams
• If the lenses are unobstructed, check the wiring between the PE beams and the controller, as well as between the IRB receiver and transmitter
• Ensure that the PE beams are properly aligned
• If not required, disable the Break-in Alarm feature in Menu 6: IR Beam
Related Articles
Break In Alarm (D-Series)
Possible causes: • The IR PE beams have been interrupted with the gate in the fully closed position • Inadvertent activation of the Break-in Alarm feature Solutions: • Clear any obstructions from the path of the PE beams • If the lenses are ...
Break In Alarm (V-Series)
Possible causes • The IR Beams have been interrupted with the gate in the fully closed position • Inadvertent activation of the Break-In Alarm feature Solutions • Clear any obstruction from the path of the beams • If the lenses are unobstructed, ...
Break In Alarm (Sector)
Possible Causes • The closing loop has been activated while the boom is lowered • Inadvertent activation of the Break-in Alarm feature Solutions • Remove any metal objects from the closing loop • Check the loop wiring and impedance (should typically ...
Ambush Alarm (D-Series)
Possible causes: • The IR PE beams have been interrupted for the pre-set period of time with the Ambush Alarm feature enabled • Inadvertent activation of the Ambush Alarm feature Solutions: • Clear any obstruction from the path of the PE beams • If ...
Ambush Alarm (D-Series)
Possible causes: • The IR PE beams have been interrupted for the pre-set period of time with the Ambush Alarm feature enabled • Inadvertent activation of the Ambush Alarm feature Solutions: • Clear any obstruction from the path of the PE beams • If ...